TPL-04 Technical-document revision and applicability register ORIGINAL NEXUS BLANK SAMPLE. Not approved maintenance data, technical authority, release-to-service or a complete contract. Adapt through actual organizational, technical and legal review before use. No real record or signature is prefilled. Content revision / نسخه محتوا: official-catalogue-expansion-01 Source observation / تاریخ بررسی منبع: 2026-10-15 COMMON RECORD CONTROLS C-01 — Record identifier Use a stable identifier; a tracking number does not certify technical status. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-02 — Record revision and superseded record Preserve previous revisions; link reason, affected scope and revalidation instead of overwriting consent/history. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-03 — Created/changed timestamps and time zone Separate actual events from planned dates; retain a clear time-zone/offset convention. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-04 — Acting entity, site and capacity Name the acting organization/site or explicitly record individual capacity; no organizational mandate is inferred. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-05 — Prepared by and source of information Identify preparer and whether each material statement is declared, observed or document-supported. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-06 — Information classification Use public summary, controlled counterparty information or restricted internal evidence; choose minimum necessary disclosure. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. public_summary / controlled_counterparty / restricted_internal C-07 — Linked case/order/article identifiers Bind related worksheets to the same case and exact article/scope; record the absence of an issued order honestly. Applies when: Another case, order, worksheet or exact article is linked. C-08 — Worksheet status and permitted next step Distinguish draft, evidence pending, held, reviewed for purpose, superseded and administratively closed; these are not airworthiness states. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-09 — Real/synthetic/example record designation Clearly label fictional/demo content. Never present synthetic evidence as approved data or real qualification. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. real / synthetic_demo / blank_example / unknown C-10 — Controlled evidence manifest Use evidence ID, issuer/title, date/revision, source, article/scope link, review status, custodian and access limit. Applies when: Evidence is claimed, reviewed or needed for a subsequent decision. Evidence ID | Issuer/title/identifier | Revision/date | Source/original/copy | Article/scope link | Review result/limitations | Custodian | Access/disclosure limit ________________________________________________________________ C-11 — Review/decision event record Record actor, actual authority reference/scope, action/outcome, revision, timestamp, evidence and restrictions. Applies when: A review, approval, rejection, hold or clearance-of-hold decision is recorded. Event ID | Actor identity | Actual authority and scope | Record/action/revision | Outcome and restrictions | Timestamp/time zone | Decision evidence ID ________________________________________________________________ C-12 — Revision/change and affected-consent history Retain previous decisions; identify changed lines, technical impact and whether fresh commercial consent is required. Applies when: Any baseline, evidence, scope or decision changes. Change ID | Previous/new revision | Affected lines/evidence | Change reason | Technical/commercial impact | Required review/consent revalidation | Status/actor/time ________________________________________________________________ C-13 — Disclosure recipient, purpose and restrictions Record authorized recipient/use, redactions and agreed duration/onward-sharing controls; masking alone is not access control. Applies when: Any information is disclosed, published or exported. C-14 — Record custodian and retention/disposal basis Reference the actual jurisdiction/organizational/contractual retention rule and any hold; do not set one global retention duration. Applies when: The worksheet/evidence is retained or disposed of for actual business use. ============================================================ Reference identity doc-title — Issuer, title and identifier Use the controlled issuer, publication identifier and title; avoid a file name as the sole identity. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. edition — Edition, revision, amendment, volume and language Record revision/amendment, temporary revision, volume, language and applicable issue status separately. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. source-access — Official source, entitlement and access owner Use a lawful controlled source and identify its custodian and access entitlement; do not attach licensed manuals by default. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. dates — Publication, effective and applicability dates; unknown fields marked Separate publication, effective, applicability and checked-as-of dates; unresolved dates remain unknown. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. Publication/effective/applicability/check date | Date or unknown | Official basis/source | Effect on this task ________________________________________________________________ Use stable row identifiers and link supporting evidence; unknown is not zero or verified. ============================================================ Task and configuration fit article — Aircraft/engine/component PN/SN/configuration Identify the exact task article and configuration; a family name or ATA chapter alone is insufficient. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. task — Task/page/data-module reference and proposed use Identify exact task/page/data-module, step or limit needed and the intended work scope; this register contains no repair instruction. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. effectivity — Evidence supporting effectivity and any exceptions Record the applicability evidence and explicit model/serial/modification exclusions; unresolved fit prevents task reliance. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. legal-data — Approved versus acceptable data basis and jurisdiction Separate approved from acceptable data; record the governing jurisdiction, approval basis and limits rather than one generic checkbox. Applies when: The reference is to support maintenance, repair, alteration or a regulated decision. changes — Later revisions, supersession and temporary revisions checked Record last official-source check, superseding/temporary revisions and action on ongoing work; publication does not equal applicability. Applies when: A revision-controlled reference is to be relied upon or revalidated. ============================================================ Review and controlled distribution review — Qualified review reference and unresolved gaps Record qualified reviewer, exact purpose and unresolved gaps; review is not a global authorization for all tasks. Applies when: A decision is made that the reference may support a specific task. distribution — Controlled copy locations and withdrawn-copy action Identify controlled-copy recipients/locations, withdrawal notices and affected work; preserve revision history. Applies when: Controlled copies or references have been issued to users/work packages. outcome — Reference-use status Record reference-use outcome only for the stated purpose, with reviewer and date; unresolved revision/applicability remains on hold. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. not assessed / hold: revision unknown / hold: applicability unknown / hold: required data status/access unresolved / reviewed for stated purpose ============================================================ Additional decision and evidence controls data-discrepancy — Ambiguous/inaccurate data query and hold Record the affected instruction, author query and permitted next action; do not invent or silently edit a repair method. Applies when: Data are incomplete, contradictory, inaccurate or ambiguous for the task. ongoing-work-impact — Revision impact on open work and decisions Identify affected work/lines and required qualified revalidation, preserving the previous data baseline. Applies when: Data revision, applicability or approval status changes while work is open. access-at-task — Accessible controlled reference at time of work Record source/copy, custodian and check time; catalogue visibility alone is not access to task data. Applies when: The reference is proposed for actual maintenance/test/inspection. COMPLETION CHECKS Current version, exact task applicability and approved/acceptable basis must be assessed separately. Hold affected reliance when data are ambiguous or unavailable; refer to the actual controlled procedure. A library catalogue or access claim is not current accessible task data. SUGGESTED CONTENT STAGES—NOT IMPLEMENTED WORKFLOW Identify lawful controlled reference Technical-data custodian Issuer, exact version, rights and accessible source identified. Review task applicability and data status Qualified task/data reviewer Article/configuration fit and approved/acceptable basis supported. Resolve revision/data ambiguity Data custodian and responsible technical authority Affected reliance held until the governing procedure permits progression. Control use and supersession Data custodian Purpose-limited status, copies and open-work impact recorded. Keep quantity, unit, identity and as-of date together; do not sum incompatible units or infer globally unique serial numbers. Life remainders require the governing basis, matching identity/unit and evidenced inputs. Unknown is not zero and overhaul does not reset total-life limits. Name currency and distinguish IRR from IRT when used; no automatic conversion, tax treatment, penalty or settlement is implied. Pool capacity is restricted by actual eligible compatible controlled units, reservations and holds in the specified interval; do not count the same unavailable unit twice. Do not supply generic task limits, test pressures, torques, retirement limits or inspection tolerances; these come from applicable controlled data. Platform account role, job title or Super Admin status is not proof of aviation qualification or task authorization. Record individual and organization/site/capability scope and validity at the time of the relevant action. Qualified proposal review and required physical critical-task independent inspection are separate controls; no universal second-person rule is invented. Customer scope/price consent, technical execution authority, release-to-service and payment are separate events. Existing governed organization controls must not be weakened to complete these worksheets; resolve missing procedure/authority before affected work. Public library blank templates contain no live identity, customer data, credentials, uploaded manuals or approved signatures. Only authorized minimum information is disclosed; a public/private label or blur is not an implemented access-control mechanism. Capture references to lawful sources; do not mirror licensed OEM, ATA or other protected manuals without permission. Evidence hashes can help integrity checking but do not establish issuer authenticity, legal validity or airworthiness. Related references: REF-ATA-ISPEC, REF-S1000D, REF-EASA-CAW Reading document IDs: DOC-CFR-145-109, DOC-ATA-ISPEC, DOC-EU-1321-20260222, DOC-EASA-EAR-202509 ORIGINAL NEXUS BLANK SAMPLE. Not approved maintenance data, technical authority, release-to-service or a complete contract. Adapt through actual organizational, technical and legal review before use. No real record or signature is prefilled.