TPL-05 Receiving inspection and discrepancy record ORIGINAL NEXUS BLANK SAMPLE. Not approved maintenance data, technical authority, release-to-service or a complete contract. Adapt through actual organizational, technical and legal review before use. No real record or signature is prefilled. Content revision / نسخه محتوا: official-catalogue-expansion-01 Source observation / تاریخ بررسی منبع: 2026-10-15 COMMON RECORD CONTROLS C-01 — Record identifier Use a stable identifier; a tracking number does not certify technical status. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-02 — Record revision and superseded record Preserve previous revisions; link reason, affected scope and revalidation instead of overwriting consent/history. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-03 — Created/changed timestamps and time zone Separate actual events from planned dates; retain a clear time-zone/offset convention. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-04 — Acting entity, site and capacity Name the acting organization/site or explicitly record individual capacity; no organizational mandate is inferred. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-05 — Prepared by and source of information Identify preparer and whether each material statement is declared, observed or document-supported. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-06 — Information classification Use public summary, controlled counterparty information or restricted internal evidence; choose minimum necessary disclosure. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. public_summary / controlled_counterparty / restricted_internal C-07 — Linked case/order/article identifiers Bind related worksheets to the same case and exact article/scope; record the absence of an issued order honestly. Applies when: Another case, order, worksheet or exact article is linked. C-08 — Worksheet status and permitted next step Distinguish draft, evidence pending, held, reviewed for purpose, superseded and administratively closed; these are not airworthiness states. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-09 — Real/synthetic/example record designation Clearly label fictional/demo content. Never present synthetic evidence as approved data or real qualification. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. real / synthetic_demo / blank_example / unknown C-10 — Controlled evidence manifest Use evidence ID, issuer/title, date/revision, source, article/scope link, review status, custodian and access limit. Applies when: Evidence is claimed, reviewed or needed for a subsequent decision. Evidence ID | Issuer/title/identifier | Revision/date | Source/original/copy | Article/scope link | Review result/limitations | Custodian | Access/disclosure limit ________________________________________________________________ C-11 — Review/decision event record Record actor, actual authority reference/scope, action/outcome, revision, timestamp, evidence and restrictions. Applies when: A review, approval, rejection, hold or clearance-of-hold decision is recorded. Event ID | Actor identity | Actual authority and scope | Record/action/revision | Outcome and restrictions | Timestamp/time zone | Decision evidence ID ________________________________________________________________ C-12 — Revision/change and affected-consent history Retain previous decisions; identify changed lines, technical impact and whether fresh commercial consent is required. Applies when: Any baseline, evidence, scope or decision changes. Change ID | Previous/new revision | Affected lines/evidence | Change reason | Technical/commercial impact | Required review/consent revalidation | Status/actor/time ________________________________________________________________ C-13 — Disclosure recipient, purpose and restrictions Record authorized recipient/use, redactions and agreed duration/onward-sharing controls; masking alone is not access control. Applies when: Any information is disclosed, published or exported. C-14 — Record custodian and retention/disposal basis Reference the actual jurisdiction/organizational/contractual retention rule and any hold; do not set one global retention duration. Applies when: The worksheet/evidence is retained or disposed of for actual business use. ============================================================ Shipment and receiving context shipment-id — Order, shipment, carrier and delivery reference Link the actual shipment to the order and item lines; record partial, split or unsolicited deliveries explicitly. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. time-site — Receipt date/time/time zone and location Use actual receipt timestamp/time zone and exact receiving facility, not only the invoice date. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. custody — Receiver and custody handover record Name the handing-over and receiving parties, custody time and location; receipt is not technical acceptance. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. package — Package, seal, preservation and transport condition Observe seals, impact/exposure indicators and preservation condition; record not-inspected or limitations without guessing. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. ============================================================ Item and documentation reconciliation identity — Expected versus received PN/SN/batch and quantity Reconcile expected and received identity, maker, quantity and unit per line; keep shortages and overages visible. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. Order/receipt line ID | Expected maker/PN/SN/lot | Received maker/PN/SN/lot | Expected/received quantity and unit | Observed match/discrepancy/not inspected | Evidence/receiver reference ________________________________________________________________ Use stable row identifiers and link supporting evidence; unknown is not zero or verified. docs — Document requirements, receipt status and evidence identifiers Use an article-class-specific requirement and basis. Record received, not received, or not applicable with basis separately from authenticity/applicability review. Record actual loss only if established. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. Article line/class | Required document and basis | Received evidence ID | Received / not received / not applicable with basis | Not reviewed/matched/discrepant | Restriction/next action ________________________________________________________________ Use stable row identifiers and link supporting evidence; unknown is not zero or verified. damage — Visible damage, contamination or environmental exposure Describe visible condition with evidence and inspection limits; do not diagnose concealed damage from photographs alone. Applies when: Visible damage/exposure is observed, reported or cannot be adequately checked. life-shelf — Applicable life/shelf-life evidence and gaps Check dates/units against applicable evidence; missing history is a review gap, not a calculated zero. Applies when: The article is life-controlled, shelf-life-controlled or that status is unresolved. dg — Dangerous-goods documentation/handling review if applicable Record screening/referral outcome and handling restrictions; a receiving clerk does not certify DG compliance through this field. Applies when: Transport documentation, article or packaging indicates possible DG or screening is unresolved. ============================================================ Hold, escalation and closure discrepancy — Discrepancy description and controlled evidence/photos Give each discrepancy an ID, evidence link, responsible party and next action; record none identified if appropriate. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. hold — Inventory hold/quarantine ID and blocked actions Record status, physical/system location and prohibited actions; do not describe this as aircraft release control. Applies when: Any unresolved discrepancy affects identity, condition, evidence, handling or permitted use. notify — Supplier/customer notification reference and response Record the notified party, date, response and agreed next action without uncontrolled disclosure. Applies when: A discrepancy or contractual notification requirement exists. qualified-review — Reviewer/authority and disposition evidence Record who is authorized for this disposition, evidence considered and restrictions; no role-only assumption. Applies when: A hold, return, restricted acceptance or technical disposition is decided. close — Resolution and separate technical acceptance reference Link resolution evidence and any separate technical-acceptance record; closing a discrepancy does not certify airworthiness. Applies when: A discrepancy is closed or the item progresses to the next controlled stage. ============================================================ Additional decision and evidence controls part-class — Article class and receiving-document basis Identify serialized component, standard part, raw material or consumable and the selected evidence basis. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. lot-split — Split-lot/document-copy quantity reconciliation Link parent lot/documents and received/remaining quantities; prevent one certificate copy from implying unlimited stock. Applies when: A shipment splits a lot/batch or uses copies covering multiple deliveries. Parent lot/evidence | Receipt/split reference | Article/lot identity | Covered/received/remaining quantity and unit | Copy-control/reconciliation evidence ________________________________________________________________ Use stable row identifiers and link supporting evidence; unknown is not zero or verified. status-ledger — Custody, inventory and technical-review status Record separate statuses and decision references; removing a receiving hold is not aircraft release. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. Custody/inventory/technical-review status | Specific status/blocked actions | Decision/evidence basis | Scoped decision-maker and time | Next review/release-of-hold reference ________________________________________________________________ Use stable row identifiers and link supporting evidence; unknown is not zero or verified. COMPLETION CHECKS Receipt is custody evidence, not technical approval or release-to-service. Lot splits and document copies must not imply more covered quantity than supported. Resolve each discrepancy through its actual scoped authority before dependent progression. SUGGESTED CONTENT STAGES—NOT IMPLEMENTED WORKFLOW Acknowledge physical receipt Receiving/custody representative Actual item, time, location and package evidence recorded. Reconcile identity, quantities and records Authorized receiving inspector Item-class-specific discrepancies identified; receipt not equated to acceptance. Apply appropriate hold/referral Responsible inventory/technical role Affected movements/use restricted and owner notified. Record qualified disposition Scoped disposition authority Resolution evidence and separate technical decision recorded; no release-to-service inferred. Keep quantity, unit, identity and as-of date together; do not sum incompatible units or infer globally unique serial numbers. Life remainders require the governing basis, matching identity/unit and evidenced inputs. Unknown is not zero and overhaul does not reset total-life limits. Name currency and distinguish IRR from IRT when used; no automatic conversion, tax treatment, penalty or settlement is implied. Pool capacity is restricted by actual eligible compatible controlled units, reservations and holds in the specified interval; do not count the same unavailable unit twice. Do not supply generic task limits, test pressures, torques, retirement limits or inspection tolerances; these come from applicable controlled data. Platform account role, job title or Super Admin status is not proof of aviation qualification or task authorization. Record individual and organization/site/capability scope and validity at the time of the relevant action. Qualified proposal review and required physical critical-task independent inspection are separate controls; no universal second-person rule is invented. Customer scope/price consent, technical execution authority, release-to-service and payment are separate events. Existing governed organization controls must not be weakened to complete these worksheets; resolve missing procedure/authority before affected work. Public library blank templates contain no live identity, customer data, credentials, uploaded manuals or approved signatures. Only authorized minimum information is disclosed; a public/private label or blur is not an implemented access-control mechanism. Capture references to lawful sources; do not mirror licensed OEM, ATA or other protected manuals without permission. Evidence hashes can help integrity checking but do not establish issuer authenticity, legal validity or airworthiness. Related references: REF-FAA-DISTRIBUTOR, REF-FAA-PARTS, REF-EASA-CAW Reading document IDs: DOC-FAA-00-56B, DOC-FAA-20-62E, DOC-EASA-EAR-202509 ORIGINAL NEXUS BLANK SAMPLE. Not approved maintenance data, technical authority, release-to-service or a complete contract. Adapt through actual organizational, technical and legal review before use. No real record or signature is prefilled.