TPL-06 MRO component intake and repair-enquiry sheet ORIGINAL NEXUS BLANK SAMPLE. Not approved maintenance data, technical authority, release-to-service or a complete contract. Adapt through actual organizational, technical and legal review before use. No real record or signature is prefilled. Content revision / نسخه محتوا: official-catalogue-expansion-01 Source observation / تاریخ بررسی منبع: 2026-10-15 COMMON RECORD CONTROLS C-01 — Record identifier Use a stable identifier; a tracking number does not certify technical status. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-02 — Record revision and superseded record Preserve previous revisions; link reason, affected scope and revalidation instead of overwriting consent/history. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-03 — Created/changed timestamps and time zone Separate actual events from planned dates; retain a clear time-zone/offset convention. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-04 — Acting entity, site and capacity Name the acting organization/site or explicitly record individual capacity; no organizational mandate is inferred. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-05 — Prepared by and source of information Identify preparer and whether each material statement is declared, observed or document-supported. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-06 — Information classification Use public summary, controlled counterparty information or restricted internal evidence; choose minimum necessary disclosure. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. public_summary / controlled_counterparty / restricted_internal C-07 — Linked case/order/article identifiers Bind related worksheets to the same case and exact article/scope; record the absence of an issued order honestly. Applies when: Another case, order, worksheet or exact article is linked. C-08 — Worksheet status and permitted next step Distinguish draft, evidence pending, held, reviewed for purpose, superseded and administratively closed; these are not airworthiness states. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. C-09 — Real/synthetic/example record designation Clearly label fictional/demo content. Never present synthetic evidence as approved data or real qualification. Applies when: Required when the worksheet is submitted for the stated purpose; drafts may retain explicit unknowns. real / synthetic_demo / blank_example / unknown C-10 — Controlled evidence manifest Use evidence ID, issuer/title, date/revision, source, article/scope link, review status, custodian and access limit. Applies when: Evidence is claimed, reviewed or needed for a subsequent decision. Evidence ID | Issuer/title/identifier | Revision/date | Source/original/copy | Article/scope link | Review result/limitations | Custodian | Access/disclosure limit ________________________________________________________________ C-11 — Review/decision event record Record actor, actual authority reference/scope, action/outcome, revision, timestamp, evidence and restrictions. Applies when: A review, approval, rejection, hold or clearance-of-hold decision is recorded. Event ID | Actor identity | Actual authority and scope | Record/action/revision | Outcome and restrictions | Timestamp/time zone | Decision evidence ID ________________________________________________________________ C-12 — Revision/change and affected-consent history Retain previous decisions; identify changed lines, technical impact and whether fresh commercial consent is required. Applies when: Any baseline, evidence, scope or decision changes. Change ID | Previous/new revision | Affected lines/evidence | Change reason | Technical/commercial impact | Required review/consent revalidation | Status/actor/time ________________________________________________________________ C-13 — Disclosure recipient, purpose and restrictions Record authorized recipient/use, redactions and agreed duration/onward-sharing controls; masking alone is not access control. Applies when: Any information is disclosed, published or exported. C-14 — Record custodian and retention/disposal basis Reference the actual jurisdiction/organizational/contractual retention rule and any hold; do not set one global retention duration. Applies when: The worksheet/evidence is retained or disposed of for actual business use. ============================================================ Customer enquiry customer — Customer, aircraft/operator context and contact Identify customer/owner/operator roles separately where different and the representative authorized for this enquiry. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. component — Component description, PN/SN and configuration Link exact maker/PN/SN/configuration to TPL-03; unknown identity blocks work that requires that identity. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. defect — Reported defect, symptoms and removal context Record the reported symptom, source, removal date/context and intermittent/no-fault-found history without confirming a cause. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. records — Life, maintenance, AD/modification and release records supplied Inventory supplied records and gaps; link evidence IDs instead of transcribing unverified life or compliance claims. Applies when: The article has relevant service/life history or maintenance/release records are required. request — Requested investigation/service and exclusions Distinguish test/inspect, repair and overhaul; define exclusions and what the customer has not authorized. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. ============================================================ Controlled MRO intake site-scope — Receiving site and organization capability/approval match Match exact organization/site/capability and any subcontracting route before accepting the proposed work. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. condition — As-received identity/condition and receiving-record link Record as-received state and link TPL-05; distinguish intake custody from technical acceptance. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. data-personnel — Applicable data, tooling, personnel and authorization references Identify current task data, tool range/calibration and personnel authorization scope/validity; see TPL-04. Applies when: Any physical assessment, inspection, test, disassembly or maintenance is planned. Data/tool/personnel/facility prerequisite | Exact reference/identity | Task/site/capability scope | Revision/validity/range | Evidence and checked result | Unresolved restriction/owner ________________________________________________________________ Use stable row identifiers and link supporting evidence; unknown is not zero or verified. assessment-only — Initial assessment permission, limits and any destructive-test restriction Bind the assessment permission to article/scope/revision, permitted disassembly and destructive-test limits; no implicit repair permission. Applies when: Investigation, testing or disassembly beyond receipt/document recording is proposed. hold — Gaps preventing inspection or repair commencement Record each unmet prerequisite and whether receipt, assessment or repair is blocked; a deadline does not clear the hold. Applies when: Required before this worksheet's purpose-limited submission/review; a draft may retain explicit unknowns. ============================================================ Initial commercial boundaries assessment-fee — Inspection/assessment charges and approval limit State currency, assessment/disassembly charges, cancellation conditions and the customer's actual financial limit. Applies when: Any charge, cancellation fee or preapproved financial ceiling is proposed. tat — TAT clock, quote validity and pause assumptions Separate investigation and repair clocks, quote validity and customer-response holds; no guaranteed deadline by default. Applies when: A response or repair timing commitment is discussed. finding-report — Agreed finding-report and revised-quotation deliverables Specify inspection report, measured evidence, limitations and revision-bound proposal deliverables. Applies when: Assessment produces a report, repair proposal or an estimate. contract — Governing order/terms reference and accepted revision Identify accepted order/terms and authorized representatives; record proposed/unaccepted terms honestly. Applies when: Binding assessment/service activity is to be authorized. ============================================================ Additional decision and evidence controls initial-authorization — Assessment permission and financial mandate Bind customer representative, exact assessment scope/revision, fee limit and acceptance evidence; do not authorize repair by implication. Applies when: Chargeable assessment, disassembly or testing is to start. test-safety — Hazard/handling information and controlled test prerequisites Record declared contamination, residual fluids or other relevant hazards and refer to applicable procedures; no handling instructions are supplied. Applies when: Physical inspection, testing, disassembly or handling is planned. nff-ber-return — No Fault Found (NFF), Beyond Economic/Economical Repair (BER), and no-work return route NFF means no fault identified within the documented test/inspection scope; it does not prove absence of all faults or authorize release. BER is a commercial judgement under stated cost/contract criteria, not an automatic unsalvageable finding. State the agreed evidence, decision/report/charge and return route; no universal BER percentage is defined. Applies when: Assessment may find no fault, uneconomic repair or work outside the agreed/approved scope. COMPLETION CHECKS Customer symptoms are not confirmed findings and a quote is not an execution authorization. Assessment/disassembly/testing permission and fees need an exact agreed boundary. BER, NFF, out-of-scope work and declined quotation need explicit report/return branches. SUGGESTED CONTENT STAGES—NOT IMPLEMENTED WORKFLOW Capture reported defect and request Customer representative Symptoms remain a report, not a confirmed finding. Check intake capability/prerequisites MRO responsible technical role Exact site, scope, identity and applicable data/tool/personnel references checked. Obtain bounded assessment permission Customer commercial representative and MRO technical authority separately Assessment scope/fees and technical prerequisites both recorded; destructive work not implicit. Record findings and proposal/return route Authorized assessor Use TPL-07 for proposal or documented NFF/BER/no-work route; no fabricated release. Keep quantity, unit, identity and as-of date together; do not sum incompatible units or infer globally unique serial numbers. Life remainders require the governing basis, matching identity/unit and evidenced inputs. Unknown is not zero and overhaul does not reset total-life limits. Name currency and distinguish IRR from IRT when used; no automatic conversion, tax treatment, penalty or settlement is implied. Pool capacity is restricted by actual eligible compatible controlled units, reservations and holds in the specified interval; do not count the same unavailable unit twice. Do not supply generic task limits, test pressures, torques, retirement limits or inspection tolerances; these come from applicable controlled data. Platform account role, job title or Super Admin status is not proof of aviation qualification or task authorization. Record individual and organization/site/capability scope and validity at the time of the relevant action. Qualified proposal review and required physical critical-task independent inspection are separate controls; no universal second-person rule is invented. Customer scope/price consent, technical execution authority, release-to-service and payment are separate events. Existing governed organization controls must not be weakened to complete these worksheets; resolve missing procedure/authority before affected work. Public library blank templates contain no live identity, customer data, credentials, uploaded manuals or approved signatures. Only authorized minimum information is disclosed; a public/private label or blur is not an implemented access-control mechanism. Capture references to lawful sources; do not mirror licensed OEM, ATA or other protected manuals without permission. Evidence hashes can help integrity checking but do not establish issuer authenticity, legal validity or airworthiness. Related references: REF-EASA-CAW, REF-FAA-RECORDS, REF-ATA-S2000 Reading document IDs: DOC-CFR-145-109, DOC-ATA-CH7, DOC-FAA-43-9D, DOC-EASA-EAR-202509 ORIGINAL NEXUS BLANK SAMPLE. Not approved maintenance data, technical authority, release-to-service or a complete contract. Adapt through actual organizational, technical and legal review before use. No real record or signature is prefilled.